Linux Basics for the Aspiring Hacker: Configuring Apache

Welcome back, my hacker novitiates!

In an earlier Linux Basics tutorial, I had demonstrated the basics of the Apache web server. Since Apache is the world's most widely used web server on the Internet (as of July 2015, Apache was 38%, IIS was 26%, and Nginx is 15%), the more you know about it and understand it, the more success you are likely to have hacking it.

In this tutorial, we will examine the basics of how the Apache server is configured. Like nearly every application in Linux or Unix, configuration is done with a plain text configuration file. Apache is no exception. As a result, we will be focused on the apache2.conf file in the /etc/apache2 directory.

Step 1Start Apache2

Let's begin by starting Apache2. We can do it via the GUI by going to Applications -> Kali Linux -> System Services -> HTTP -> apache2 start, as shown below.

Or start it by the command line, like below.

kali >service apache2 start

This starts the Apache2 daemon and the web server should now be serving our content to the Internet.

Step 2Browse to the Server

To check to see whether our Apache server is working, let's simply browse to the localhost or 127.0.0.1. If you see the following page, you now know that the server is working properly!

Step 3Open the Configuration File

To configure Apache, we need to go to the /etc/apache2 directory.

kali > cd /etc/apache2

Then, do a long listing on this directory.

kali > ls -l

As you can see, there are several files and directories in this directory. For our purposes now, the most important is the apache2.conf, but also note that we have the ports.conf file and the sites_available directory, which we will be using later in this tutorial, and several other configuration files and directories.

We can open apache2.conf in any text editor, but here I will use Leafpad. It can be opened by simply typing:

kali > leafpad /etc/apache2/apache2.conf

As you can see, this opens a plain text file with all the configuration information for our Apache web server. I will attempt to walk you through the key elements of this file in order to configure our server.

Step 4ServerRoot

Let's scroll down past all the comments and get to line #70 where the global configuration section begins. Here we can see that the ServerRoot is configured here. This is the top of the directory tree where the Apache server keeps all its server-related files. Line #84 defines the ServerRoot. We can simply uncomment it if we want to set /etc/apache2 as our ServerRoot. I recommend that you do that.

Step 5Timeout

In the next section, we have the variables that define the Timeout, KeepAlive, MaxKeepAliveRequests, and KeepAliveTimeout.

• Timeout: This is the time the server has to fulfill each request. The default setting is 300 which means that server has 300 seconds or 5 minutes to fulfill each request. This is probably too long and can probably be set to around 30 seconds
• KeepAlive: This means that the server is kept alive for multiple requests from the same client. It is set to "On" by default, which means that clients don't have to create a new connection with every request, saving much overhead on the server.
• MaxKeepAliveRequests: This is the maximum number of seconds between requests from an established connection. If we set this value to 0, then the amount of time is unlimited.
• KeepAliveTimeout: This is the amount of time between requests that the connection is kept alive.

I suggest you leave the defaults in all, except the "Timeout." Each situation is different and you may need to change these defaults to tailor performance to your particular environment.

Step 6Apache2 User & Groups

Let's skip down a few lines in the apache2.conf file until we get line #177. Here we can set the Apache2 user and groups. Note in the comment on Line #177 that we can set these variables in the envvars (environment variables) file. We will leave this to a future tutorial, but note that both the User and Group are variables that come from the /etc/apache2/envvars file.

Next, we can define the AccessFileName in Line #187. This defines where we can go in each directory to find configuration directives.

This final section starting on Line #193 here is critical to the security of Apache. These lines make certain that web clients cannot access either the .htaccess or .htpasswd files.

Step 7Logging

This next section defines how Apache manages the logging.

In the first stanza, we address HostNameLookups. This directive tells Apache2 whether it should do a DNS lookup when it logs a connection. By keeping it "off" as it is by default, Apache2 performs much better.

Step 8Site Available

Next, let's look at the site_available directory and, most importantly, the default file there. This is often referred to as the default Virtual Hosts file. Open this file by typing:

kali > leafpad /etc/apache2/site_available/default

As you can see, there are three critical areas of this file. The first line defines what port the web server is listening on. Here, it is defined as listening on any interface on port 80 (*:80). The second line defines where email should be sent when there are server problems. By default, it is set to webmaster@localhost. If you are the systemadmin, you may want to set this to your email address (or simply alias this address to yours). The third item might be the most important, the DocumentRoot. It defines where the content for this virtual host will be located, in this case, /var/www. I suggest you leave it as defined here.

Step 9Ports

Finally, for this tutorial, we can navigate down to line #248 of the apache2.conf file and notice that there is an "include port.conf" line. This directive simply tells Apache to go to the port.conf file to find ports it should listen on.

If we open that file, port.conf, we can see that it is configured to listen on port 80 (line #9). The next section, starting on line #11, checks to see whether the mod_ssl.cmodule is included, and if it is, opens port 443 (line 17).

If we want to change the ports for either HTTP or HTTPS, we can do that here by simply replacing the port numbers in this file.

Step 10Restart the Apache Server

Now that we have any changes to our Apache2 configuration, we need to restart the server for them to take place.

kali > service apache2 restart

Now we know a bit more about probably the most important Linux application, Apache Web Server. We will continue to expand your hacker horizons with more Linux Basics for the Aspiring Hacker, so keep coming back, my hacker novitiates!